BOD INCUBATOR (MODEL NO. HVS-BOD105)

BOD INCUBATOR

(MODEL NO. HVS-BOD105)

Technical Specification: -

1. Double walled construction; Outer door: -Mild steel duly pre-treated with epoxy powder coated paint or stainless steel. Smart Electronic Lock with door closer LED indicator with key arrangement provided.

2. Inner chambers: - Stainless Steel 304 Insulation- Machine filled CFC free PUF insulation Three tray shelves made of SS 304 grade Ribbed for placement of shelves at desired heights.

3. Microprocessor based control system with door mounted display.

4. Temperature control: - Microprocessor controller with LED display of Temperature with set, process value and audio-visual alarm Temperature Range: + 05°C to 50° C or higher, Accuracy: ±0.5°C

5. Preferable Capacity: 280 litre or higher.

6. Full view inner glass door permits inspection of specimens without disturbing the same.

7. Triple walled back of the unit fitted with powerful fan motor for forced air circulation to maintain uniform condition inside chamber

8. Heating done by long life SS tubular heaters and cooling by Hermetically sealed compressor with CFC Free refrigerant.

9. The unit switch from heating to cooling and vice versa irrespective of the ambient temperature capable of working without any user intervention.

10. illuminations inside the chamber with at least 3 No. fluorescent tubes with cyclic timer 0 to 24 hours.

11. Machine have special safety features like Electric circuit breaker, Timer delay relay for compressor, sensor failure alarm, overload cut off relay for compressor, High temperature safety cut off and alarms for High/ low set parameters.

12. Caster wheel at bottom for easy mobility.

13. Cord and plug to work on 220 V 50Hz AC supply.

14. inbuilt automatic voltage stabilizers.

16. NABL Calibration certificate provided.

INTERNAL CODE: - KD.25610