Online Conductivity Controller (Model No: HVO-OCM-21)

Online Conductivity Controller

Specification:

• Range: 0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm 
• Conductivity Resolution & Accuracy: 0.001, 0.01, 0.1, 1, Accuracy ±1% F.S. 
• Calibration: 1 to 3 points (10 µS / 84 µS / 1413 µS / 12.88 ms/ 111.8 ms)
• TDS Range: 0 to 10.00, 100.0, lO00ppm, 10.00, 200.0 ppt
  TDS Resolution & Accuracy: 0.01, 0.1, 1, Accuracy ±1% F.S. 
• TDS Conversion Factor: 0.1 to 1.0 (default 0.5)
• Temperature Range: 0 to 100°C / 32 to 212°F
• Temp. Resolution & Accuracy: 0.1°C/°F, Accuracy ±1°C/±1.8°F
  Temperature Coefficient: 0.0 to 10.0%/°C
• Off Set Calibration: 1Point, Reading ±10°C
  Signal Output: 4~20mA
  Load: Maximum 500Ω
• High/Low Limit Alarm: 0.02µS/cm to 20.0mS/cm (selectable)
• Communcation Interface: RS485
• Power Supply: DC 24V

 Salient Features 

• 1 to 3 points calibration with automatic recognition of conductivity standards.
• Selectable cell constant, temperature coefficient and TDS conversion factor.
• Automatic temperature compensation (in built) ensures accurate readings over the entire range.
• Setup menu allows setting the number of calibration points, alarm limits, hysteresis value, 4 to 20 mA output, etc.
• Reset function automatically resumes all settings back to the factory defaults.
• Industrial online conductivity controller is suitable for monitoring the conductivity and total dissolved solids of water quality.