Shell & Tube Heat Exchanger (Model No. HVO-HT-16)

HOVERLABS

  • Rs. 105,584.00
8

Shell & Tube Heat Exchanger

Description

Shell and Tube Heat Exchanger are popular in industries because they occupy less space and offer reasonable temperature drop. The apparatus consists of fabricated SS shell, inside which tubes with baffles on outer side are fitted. It is 1-2 pass heat exchanger so that hot water passes to one end of shell through the tubes and returns to another end through remaining tubes. The cold water is admitted at the one end of shell, which passes over the hot-water tubes. Valves are provided to control the flow rates of hot and cold water. Flow rates of hot and cold water are measured using Rotameters. A magnetic drive pump is used to circulate the hot water from a re-cycled type water tank, which is fitted with heaters and Digital Temperature Controller.

Experiments

To study the following at various flow rates:

  • LMTD.
  • Heat transfer rate
  • Overall Heat Transfer Co-efficient

Features

  • Superb Painted structure
  • Simple to operate & maintain

Utilities Required

  • Water supply 20 lit/min (approx.)
  • Drain : Floor drain required.
  • Electricity Supply: I Phase, 220 V AC, 4 kW
  • Floor area of 1.5m x 0.75 m

Technical Specification

System

Water to Water

Shell

Material Stainless steel, Dia. 220 mm, Length 500 mm (Approx.), 25% cut baffles at 100 mm distance 4 Nos.

Tube

ID 13 mm, OD 16 mm, Length 500 mm (24 Nos.)

Water Flow Measurement

Measuring cylinder & Stopwatch with Rotameters (2Nos.) one each for cold & hot fluid

Hot Water Tank

Made of Stainless steel Insulated with ceramic fibre wool.

Hot Water Circulation

Magnetic Pump made of Polypropylene to circulate Hot Water. Maximum working temperature is 80°C.

Heaters

2 kW Nichrome wire heater (2 Nos.)

Temperature Sensors

RTD PT-100 type 5 Nos

Control panel

Digital Temperature Controller: 0-199.9°C (For Hot Water Tank), Digital Temperature Indicator: 0-199.9°C,with multi-channel switch, On/Off switch, Mains Indicator etc

Overall Dimensions

(L x B x H) 1100 x 450 x1400 mm

 

Apparatus for determine Frictional losses in straight pipe, pipe fitting, with S.S. sump tank, S.S. measuring tank, S.S. pump, Manometer & suitable piping & fittings with pressure tappings.

*Painted rigid MS structure is provided to support all parts