AUTOCLAVE VERTICAL (ELECTRICAL) (MODEL NO. HVS-AUV-053)

AUTOCLAVE VERTICAL (ELECTRICAL)

(MODEL NO. HVS-AUV-053)

Technical Specification: -

1. The vertical top loading Autoclave have Chamber Capacity of 170 litre or higher.

2. The Unit able to accommodate 02 Wire mesh carrier of SS304

3. The units internal chamber, lid, external body and all other wetted parts fabricated from stainless steel of 304 grade

4. Autoclave have hydraulic die press seamless lid from stainless steel plate

5. Autoclave lid have Radial locking system for lid and lever, handle molded from industrial plastic.

6. The lid provided with auto purge cum vacuum breaker valve and a manually open able valve for exhaust

7. it molded seamless silicon Gasket of food grade quality rubber

8. The unit have & solenoid valve for additionally purging the air & end of cycle automatic exhaust

9. The Vertical Autoclave have stainless steel pressure gauge with dual range dial display in KPA and PSI along with a correlated temperature scale for steam in degrees Celsius.

10. Working Pressure 15 psi to 17 psi

11. The operations of the unit controlled by a microprocessor based PID controller

12. The user able to set the temperature up to 121°C to134°C with +0.1°C accuracy.

13. The timer range 90 mins or higher

14. in case of abrupt power failure / switching off, the Last Cycle which was set remain in the memory

15. The unit equipped with Low Water Detection unit and give Audio- Visual alarm in case of Low Water in the chamber and cut off the supply to the heater

16. Autoclave give sensor open alarm in case of sensor fault

17. The unit have safety valve to protect the equipment in case of over pressurization

18. The unit give indication by audio-visual Digital alarm on completion of set autoclave cycle

19. The autoclave chamber hydrostatically tested at 1.5 times of its working pressure

20. Supply Voltage: 230V AC, 50Hz

21. Autoclave provided with Calibration reports with NABL traceability

INTERNAL CODE: - KD.25610